Commercial
Grain Bins - Wide-Corr™ Centurion™ From Westeel
These premium corrugated steel commercial
grain bins feature 44" extra sturdy wall sheets, positive rib
seal, and factory assembled heavy-duty access door.
Westeel commercial grain bins feature:
Corrugated side-wall sheets
The 4" corrugated sidewall sheets are engineered for fast erection
and greater strength.
Wall Stiffeners
Heavy-duty wall stiffeners are used on all commercial grain bins.
The heavy-duty base plate, which is bolted to the stiffener, anchors
the bin to the foundation.
Roof Design
Roof is specially re-enforced to accommodate auxiliary equipment
and heavy snow loads. The roof is attached to the sidewalls with
a heavy gauge top angle and the 30° slope promotes moisture
run-off and maximum usable capacity.
With over 150 models of Centurion
Commercial Grain Bins,
Westeel has the storage solution for any application.
Featuring Super Strong Sidewall Sheets
 Centurion
sidewall sheets are made from G115 galvanized steel which is 25%
heavier galvanizing than the traditional industry standard G90 and
provides a longer coating life for your steel grain bin against
the elements. Most sheets are rolled from high strength 50-ksi steel
and are 44" tall, which means you use fewer sheets that are
lighter but stronger; therefore, fewer seams for improved weather
protection and faster installation. Their ultra flat 4" corrugation
pattern provides superior cleanout without compromising structural
strength.
Heavy Bottom Angle
A heavy bottom angle is used to secure the bin and ensure a positive
seal between the sidewall and the foundation.
New Variable Section Stiffeners (VSS)
Centurion utilizes an all-new upright technology called Variable
Section Stiffener (VSS), which works on the principle that the greater
the vertical load required, the larger the stiffener section should
be. This means the uprights and the section change in thickness
from top to bottom. For additional value, our new upright laminating
system allows the use of pre-galvanized material and minimizes the
use of the splice plates in most connections.
Specially Designed Crawl Door
Factory assembled and installed, Centurion features a standard heavy-duty
24" diameter crawl door manufactured on a heavy wall sheet
for secure fit and easy access.
High Strength Bolts
Westeel double bolts (triple on some large diameter bins) all sidewall
sheets with high strength Grade 8.2 JS500 zinc plated bolts. Polyethylene
washers ensure a weather-tight seal for each bolt.
Extra Sturdy Roof Design
Designed using the latest in roof design, the Centurion roof features
small corrugations formed right into the galvanized roof sheets
for increased rigidity and strength, a weather-tight fit at all
ribs and an aggressive 30° slope for quick moisture run off.
The roof itself is attached with a top angle that provides a positive
connection of the roof sheets to the sidewall sheets. An inspection
hatch roof sheet provides access to the interior of the bin and
comes standard with roof ladder rungs. Wide-Corr's rafter roof has
been designed to take additional loads from auxiliary equipment
and can handle up to 10,000 lbs. on Series 54 to 105 bins. Heavy
beam roof framing supports, combined with purlins and thrust rods,
ensure no sagging or leaking from heavy loads of snow or ice.
» CLICK HERE
FOR SPECIFICATIONS «
|
